Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Fireplace Services Across Decatur
Fireplace services in Decatur typically range from $195 for a gas fireplace tune-up to $1,800-$3,400 for firebox rebuilds on historic masonry units, with most Level 2 inspections and cleanings falling between $285 and $425. Our crews serve Decatur’s 4-square-mile historic core from our Atlanta dispatch office, and we schedule Winnona Park and Oakhurst calls with extra time built in - tight bungalow lots mean roof access takes longer, and shared chimney stacks need documentation that suburban jobs rarely require. Call (470) 435-7984 to book a visit; estimates are free, and we deliver a written price before any work starts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Level Two Chimney Atlanta Is Decatur’s Preferred Fireplace Services Company
We’ve completed more than 38,000 chimney inspections since 2009, and a disproportionate share of our structural work comes from Decatur’s early-20th-century housing stock. The city is only 4 square miles, but its density of unlined or improperly lined masonry chimneys generates complex jobs we don’t see in newer markets.
Decatur homeowners who review us consistently mention two things: the camera footage we show them, and the written price they received before anyone touched a tool. Clause 1 of the Haven Standard - Have it in writing - means no surprises. Our technicians are background-checked and uniformed; you get a text when yours is en route, with a name and license number.
We don’t claim to be cheapest. We claim to be inspectable. Every job includes a documented photo record under Haven Standard Clause 4, running continuously since 2009. Our Fireplace Services team carries the equipment to show you what your flue actually looks like, not what someone says it looks like.
Our Fireplace Services in Decatur

Gas Fireplace Service
Gas fireplace service in Decatur runs $195-$340 for a standard tune-up, and $680-$1,200 if we find a failed valve, cracked burner pan, or deteriorated log set. The real issue in Decatur isn’t the appliance - it’s the flue behind it. On the bungalow blocks of Oakhurst and Winnona Park, we regularly find 1990s gas-log inserts dropped into original wood-burning masonry flues with no liner added and no permit pulled. The flue is oversized for the appliance, drafts poorly, and accumulates acidic condensate that eats clay tile joints from the inside. We document this with camera footage, quote relining in writing if needed, and never recommend work you can’t see for yourself.

Wood Burning Fireplace
Wood burning fireplace inspection and cleaning in Decatur costs $285-$425 for a Level 2 service with camera scan and photo record. Decatur’s roughly 50 freeze-thaw days per year crack soft historic mortar joints, and prolonged humid summers promote biological growth inside unused flues. When heating season resumes, that moisture compounds creosote buildup and efflorescence. We see Class III glazed creosote more often here than in drier markets - it requires mechanical removal, not just brushing, and we price that difference upfront.

Fireplace Insert
Fireplace insert installation or replacement in Decatur ranges from $2,400-$4,800 depending on liner length, appliance BTU rating, and whether the existing firebox needs refractory mortar work. This is our most common structural call in Decatur. The 1980s-2000s retrofit wave left hundreds of inserts in this city venting into unlined or improperly sized flues. We measure the flue, match the liner to the appliance’s spec sheet, and install HeatShield or DuraFlex liners sourced through Haven’s buying network. The written scope specifies material, diameter, and warranty term before we start.

Damper Repair
Damper repair or replacement in Decatur costs $340-$680 for a standard throat damper, and $780-$1,400 for a top-sealing damper with stainless cap if the existing throat is rusted shut or the firebox opening is irregular. Decatur’s century-old chimneys often have original cast-iron throat dampers seized with rust and creosote, or they’ve been removed entirely during a retrofit. A failed damper costs you conditioned air year-round and can allow downdraft to push neighbor-appliance exhaust into your home on shared-stack properties. We test damper seal with a smoke pencil, show you the result, and quote replacement before disassembly.

Firebox Repair
Firebox repair in Decatur runs $1,200-$2,800 for refractory panel replacement or parging with HeatShield Cerfractory foam, and $2,800-$4,500 if the rear wall or sidewalls need rebuilding with new firebrick. Decatur’s original fireboxes were built with common brick and lime mortar, not true refractory materials, and 80-100 years of thermal cycling has spalled faces and opened mortar joints. We document the damage with photos, quote the repair scope in writing, and apply fresh refractory mortar or panels to NFPA 211 standards.

Fireplace Conversion
Fireplace conversion - wood-to-gas or gas-to-wood - in Decatur costs $3,200-$6,500 depending on liner requirements, gas line extension, and firebox modifications. Every conversion starts with a Level 2 inspection to verify the flue can handle the new appliance’s venting requirements. In Decatur’s shared-stack situations, we also verify that conversion won’t create drafting conflicts with adjacent appliances tied into the same masonry chase.

Before
AfterTrusted Brands We Service in Decatur
We install and service fireplaces and components from HeatShield, Gelco, and Olympia Chimney, procured through Haven’s buying network to keep customer prices honest. HeatShield cerfractory foam is our standard for firebox resurfacing and flue liner restoration on Decatur’s historic chimneys - it bonds to clay tile and masonry at temperatures exceeding 2,900°F. Gelco caps and Olympia Chimney stainless liners ship to our Atlanta warehouse, so most Decatur jobs don’t wait on parts. We don’t stock every SKU, but we don’t markup special orders either: the invoice shows our landed cost plus labor, documented in the written scope under Haven Standard Clause 1.
Common Fireplace Services Problems We See in Decatur Homes

- Gas-log inserts in unlined masonry flues. On Winnona Park bungalow blocks, we routinely find 1990s-2000s inserts venting into original wood-burning flues with no liner and no permit. The oversized flue drafts poorly, condenses acidic moisture, and destroys clay tile joints from the inside. Camera inspection reveals what a flashlight cannot.
- Shared or adjacent flues in attached properties. Decatur’s dense historic core puts chimney stacks close enough that a neighbor’s furnace or water heater can vent into the same masonry chase as your fireplace. Smoke and carbon monoxide migrate sideways. We document cross-contamination risk with photos and recommend separation or dedicated liners.
- Freeze-thaw damage to century-old brickwork. Decatur’s 50 annual freeze-thaw cycles crack soft historic mortar and spall face brick, especially on Oakhurst chimneys with failing crowns. Water enters the firebox, accelerates deterioration, and turns minor mortar gaps into structural concerns.
- Biological growth and moisture in unused summer flues. Hot, humid Decatur summers keep flue interiors damp for months. When fall arrives, that moisture meets accumulated creosote and produces acidic runoff, efflorescence on exterior brick, and odors that signal deeper problems.
Pricing for Fireplace Services in Decatur, GA
| Service | Typical Range in Decatur |
|---|---|
| Gas fireplace tune-up | $195 - $340 |
| Level 2 inspection with camera scan | $285 - $425 |
| Damper repair / replacement | $340 - $1,400 |
| Fireplace insert installation | $2,400 - $4,800 |
| Firebox repair (refractory/parging) | $1,200 - $2,800 |
| Firebox rebuild | $2,800 - $4,500 |
| Fireplace conversion | $3,200 - $6,500 |
What moves a job to the high end of these ranges: shared-stack properties requiring additional documentation and coordination; firebox rebuilds on chimneys with spalled brick needing crown repair first; and insert installations where the existing flue is unlined or improperly sized and requires full relining before the appliance can be safely vented.
We don’t do “call for pricing.” Every Decatur customer receives a written price, written scope, and written warranty before work begins - Haven Standard Clause 1, no exceptions. Bring us a competitor’s written estimate and we’ll provide a Free Second Opinion. Call (470) 435-7984 for your exact quote; estimates are free.
The Decatur Shared-Stack Problem: What We Document

On the dense bungalow blocks of Oakhurst and Winnona Park, 1920s-1940s houses sit close enough that adjacent chimneys share a single masonry stack, so a neighbor’s gas furnace or water heater flue can vent into the same chase as your fireplace - a cross-contamination setup that is rare in newer metro suburbs but routine in Decatur’s 4-square-mile historic core. This isn’t a theoretical concern. We find it during Level 2 inspections more often here than in any other market we serve.
We were called to a 1930s Craftsman on the Winnona Park bungalow blocks where the homeowner’s gas-log insert, installed in the 1990s, had been dropped into the original unlined wood-burning flue with no liner and no permit. When we ran a Level 2 inspection, the flue was oversized, drafting poorly, and coated in acidic condensate that had eaten into the clay tile joints; the adjacent stack was tied into a neighbor’s appliance by a shared masonry chase, so we documented the cross-contamination risk before installing a correctly sized HeatShield liner and a new damper. The firebox got fresh refractory mortar and a NFPA 211-compliant cap to keep the shared chase from pulling flue gases sideways.
If you live in a Decatur bungalow built before 1950, your chimney may share a wall or chase with your neighbor’s. We verify this with camera inspection and smoke testing, show you the footage, and quote separation or liner installation in writing if needed. No work starts until you’ve seen what we saw.
We Also Serve Cities Near Decatur
Our crews work throughout metro Atlanta, and we regularly schedule Fireplace Services in Decatur alongside calls in Clarkston, Atlanta, Marietta, and Roswell. Dispatch is coordinated from our Atlanta office, but Decatur jobs are assigned to technicians familiar with the city’s historic housing stock and shared-stack configurations. If you’re in Oakhurst, Winnona Park, or the streets near Agnes Scott College, we build extra time into your appointment for the roof access and documentation these properties require.
Serving Decatur, GA - Our Local Coverage Area

We’re based in the Decatur area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fireplace Services in Decatur
Yes, and we find this exact configuration regularly in Decatur’s historic core. Shared masonry chases allow flue gases to migrate between adjacent appliances when drafting pressures differ or mortar joints fail. We identify cross-contamination with smoke-pencil testing and camera inspection, then document the risk with photos. Separation or a dedicated liner typically resolves it; call (470) 435-7984 for an exact quote - estimates are free.

You won’t know without a camera inspection. The 1990s-2000s retrofit wave in Decatur left hundreds of inserts venting into unlined masonry flues - perfectly legal-looking from the hearth, but non-compliant and potentially hazardous inside. We run a Level 2 camera scan and show you the flue interior. If it’s oversized, unlined, or coated with acidic condensate, we quote relining in writing. Call (470) 435-7984 to schedule.

Third-degree creosote is a hard, glossy, tar-like coating that looks like melted plastic poured down the flue - very different from the light, flaky soot of first-degree buildup. Decatur’s humid summers and freeze-thaw winters promote it in under-maintained wood-burning systems. We remove it with mechanical rotary systems or chemical treatment, priced at $680-$1,400 depending on flue length and severity. Call (470) 435-7984 for an inspection and exact quote.

Repair the crown and exterior masonry first, then reline. Spalling brick indicates water intrusion from a failed crown or mortar joints; installing a liner without stopping the water source traps moisture against the new system and voids most liner warranties. We assess both, quote the sequence in writing, and never recommend relining alone when the shell is failing. Call (470) 435-7984 for a Level 2 inspection and written scope.

Yes - prolonged humidity promotes biological growth, keeps flue interiors damp, and compounds creosote acidity when heating season resumes. A pre-fall inspection identifies moisture damage, blockages, and deterioration before you light the first fire. In Decatur, we recommend scheduling this by early October at latest. Call (470) 435-7984 to book; estimates are free.
Ready to see what your fireplace flue actually looks like? Call (470) 435-7984 to schedule a Level 2 inspection with camera scan and documented photo record. We’ll deliver a written price before any work starts, back every job with our 365-Day Done Right Promise, and show you exactly what we found - no flashlight guesses, no surprises after the tech is already in your home. Corrine Halstead and the team at Level Two Chimney Atlanta serve Decatur under the Haven Standard, and we’re available by live phone 24 hours a day.
Written by Corrine Halstead, Owner at Level Two Chimney Atlanta, serving Decatur and metro Atlanta since 2009.






Before
After
Before
After