Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterHeatShield Chimney Cap & Crown in Atlanta: What to Know First
We provide independent HeatShield chimney cap and crown service across Atlanta, with most repairs completed within one to two business days of your call. A written price arrives before any work starts, and every job includes a camera-scan inspection with a documented photo record. This page is for HeatShield owners in neighborhoods like Buckhead, Decatur, Sandy Springs, and Virginia-Highland who need cap replacement, crown repair, or coating work done right the first time. Call (470) 435-7984 to schedule your free estimate.
How HeatShield Products Fail - and How We Fix Them
- HeatShield Cerfractory Foam liner systems with deteriorated top-seal mortar - The foam jacket shrinks back from the flue mouth over Atlanta’s freeze-thaw cycles, opening a gap where water enters and attacks the crown from below. We pull the damaged seal, re-establish the foam-to-flue bond with HeatShield-compatible refractory mix, then verify cap overhang is sufficient to shed Georgia’s hard rains.
- HeatShield UL Listing 1777 relined flues with corroded galvanized caps - The original cap shipped with many 1777 kits is 26-gauge galvanized, which rusts through in 4-7 years here given our humidity and acid rain load. We replace with 304 stainless or copper caps from our Haven buying network, matched to the liner diameter and flue count, and document the upgrade in your photo record.
- HeatShield Smoke Chamber Restoration jobs with crown wash cracking above - Smoke chamber parging tightens the flue path, but if the crown above it still channels water inward, the new refractory work gets saturated. We won’t seal a smoke chamber without first verifying crown integrity; if the wash is spider-webbed or spalled, crown repair or coating comes first, per Clause 1 of the Haven Standard.
- HeatShield Joint Repair systems with cap-induced downdraft staining - Mesh caps with too-fine screening on 1777 liners trap combustion moisture, accelerating joint erosion we just repaired. We spec cap mesh at 5/8-inch or coarser for oil and wood flues, or switch to a familiar brand like Gelco or Famco when the application demands it.
- HeatShield Crownsaver coating failures from improper prep - Atlanta’s pollen season and clay-tile spalling leave a film that Crownsaver won’t bond to; we’ve peeled back “repaired” crowns that were pressure-washed in March and coated in April, still green with oak tallow. Our prep runs wire brush, acid etch where needed, and a 24-hour dry window before the first Crownsaver pass.
Our HeatShield Chimney Cap & Crown Process
- 1
Call and schedule. A live person answers, checks our calendar, and notes your HeatShield product line if you know it. We text your assigned technician’s name and photo before arrival.
- 2
NFPA 211 Level 2 inspection with camera. Corrine Halstead and our crew run a camera down the flue to document liner condition, then photograph the cap, crown, and wash from the roof. The camera doesn’t negotiate - it just shows you what’s there.
- 3
Written price and scope. We specify OEM HeatShield parts versus quality aftermarket alternatives from our Haven buying network, with the trade-off explained in plain terms. You approve before any work begins.
- 4
Repair or replacement. Cap installation, crown coating with Crownsaver, or full crown rebuild using materials sourced through our DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield supply relationships.
- 5
Post-work camera verification and photo record. We re-scan to confirm flue integrity, then deliver your documented record under Haven Standard Clause 4 - same practice since 2009.
- 6
365-Day Done Right Promise activation. Your written warranty is stamped and filed. If it’s not done right, we make it right.
BeforeAfterWhat HeatShield Chimney Cap & Crown Costs in Atlanta
| Service | Typical Range | What Moves the Price |
|---|---|---|
| HeatShield cap replacement (single flue, stainless) | $280 - $450 | Flue diameter, roof pitch, need for new base flange |
| HeatShield multi-flue cap (custom fit) | $520 - $890 | Chimney dimension, mesh spec, copper vs. stainless |
| Crown wash repair (spall patching, minor) | $340 - $580 | Extent of cracking, number of layers needed |
| HeatShield Crownsaver coating (full crown) | $680 - $1,150 | Crown size, prep hours, pollen or algae remediation |
| Full crown rebuild with pour | $1,400 - $2,600 | Chimney width, forming complexity, rebar corrosion |
These are real Atlanta prices for 2024-2025, not teaser rates. Every estimate is free, every price is written, and every scope is fixed before we start. Call (470) 435-7984 for your exact quote.
Why Atlanta Homeowners Call Level Two Chimney Atlanta for HeatShield Work
We’ve inspected and cleaned more than 38,000 chimneys since 2009, and a growing share of our Atlanta work involves HeatShield relined systems installed in the 2015-2020 window that are now due for cap and crown attention. Corrine Halstead’s crew knows the difference between a 1777 liner cap and a Cerfractory Foam top-seal repair, and we stock both HeatShield-compatible parts and crossover alternatives from Gelco and DuraFlex when the job calls for them. Background-checked, uniformed technicians arrive on schedule with license information displayed. Calls are answered live, 24 hours a day. Your photo record, written warranty, and 365-Day Done Right Promise are included on every job - no exceptions, no after-the-fact upsells.
FAQs
HeatShield’s liner warranty covers defects in the liner system itself, not cap or crown components unless explicitly included in your original installation contract. As an independent HeatShield service provider, we document pre-existing conditions with our camera scan so you have evidence if a warranty claim is warranted. Call (470) 435-7984 and we’ll review your paperwork with you.
We source both OEM HeatShield caps and quality aftermarket equivalents through our Haven buying network. For 1777 liner systems, we often prefer 304 stainless caps from Olympia Chimney or Famco for longevity in Atlanta’s climate. We name the manufacturer in your written scope before you decide.
Crown repair is viable when cracks are surface-level, the wash is still structurally sound, and no rebar is exposed or rust-stained. Full rebuild is necessary when the crown has separated from the brick course, shows spalling deeper than half an inch, or leaks water into the smoke chamber below. Our camera scan and roof photos show you which category you’re in. Call (470) 435-7984 for a free assessment.
A new cap stops future water intrusion but does not reverse existing damage to the liner or surrounding masonry. If your camera scan shows flue wall deterioration or joint gaps, cap replacement alone is insufficient. We write both the cap scope and any liner repair as separate line items so you see exactly what each costs.
Most HeatShield cap replacements and crown coatings are scheduled within two business days, with the work itself taking 2-4 hours on site. Full crown rebuilds require weather-dry conditions and may need 48 hours for concrete cure before final inspection. We text your technician’s arrival window the morning of service.
Written by Corrine Halstead, Owner, Level Two Chimney Atlanta at Level Two Chimney Atlanta, serving Atlanta and nearby areas.