Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cleaning & Sweep Across Marietta
A chimney cleaning and sweep in Marietta typically runs $189-$349 for a standard annual service, with Level 2 camera inspections starting at $279. Most Marietta appointments are scheduled within 3-5 business days, and every visit includes a written price before work starts, a documented photo record, and the 365-Day Done Right Promise. Call (470) 435-7984 for a free estimate.
We serve Marietta from our Atlanta dispatch office, with crews covering the full sweep of Cobb County from the historic blocks around Marietta Square to the rural properties past the city limits where wood stoves run as primary heat. Whether you live in a 150-year-old Victorian on Whitlock Avenue or a 1970s brick ranch off Canton Road, the inspection standard stays the same: NFPA 211 Level 2, camera down the flue, written scope in hand before any work begins.
Why Level Two Chimney Atlanta Is Marietta’s Preferred Chimney Cleaning & Sweep Company
We’ve completed more than 38,000 chimney inspections and cleanings since 2009, and a significant share of those have been in Cobb County homes where the housing stock tells its own story. Marietta customers know we don’t quote over the phone and show up hoping to sell - we deliver a written price, written scope, and written warranty on every job under Haven Standard Clause 1.
Our reviews from Marietta homeowners consistently cite two things: the camera footage they can see for themselves, and the technician who explained what was actually wrong before quoting a dime. Background-checked, uniformed crews are assigned by name, and you’ll get a text when yours is on the way. Live phone support runs 24/7, not voicemail.
Response time to Marietta is typically 3-5 days for standard sweeps, with priority scheduling available before burning season ramps up in late October. We know the difference between a Square-area multi-flue stack and an East Cobb gas-log retrofit, and we scope accordingly.
Our Chimney Cleaning & Sweep Services in Marietta

Annual Sweep
For most Marietta homes with occasional fireplace use, an annual sweep clears Class I and II creosote, checks the firebox and damper, and confirms the flue is drafting properly. But if you’re burning a wood stove past the city limits as your primary heat source, you’re loading creosote faster than the standard interval allows. We see rural Marietta properties that need mid-season checks - not because we’re selling, but because a wood stove burning 12 hours daily produces heavy creosote deposits that a yearly glance won’t catch. We’ll tell you honestly whether your burn pattern puts you on a 6-month or 12-month cycle.

Level 1 Inspection
A Level 1 inspection covers readily accessible portions of the chimney - the firebox, damper, smoke chamber, and flue opening - without specialized tools. It’s appropriate for Marietta homeowners whose systems haven’t changed and who burn occasionally during cold snaps. For the 1950s-1970s brick ranches blanketing Cobb County, though, a Level 1 has a blind spot: it won’t catch hairline cracks in clay tile liners that are now reaching end-of-life. We recommend pairing every Level 1 with a camera assessment if your liner age is unknown.

Level 2 Inspection
Level 2 is our default on every Marietta visit, and it’s non-negotiable for certain properties. NFPA 211 requires it at sale, after a chimney fire, or when any appliance is changed. In Marietta, we require it for every pre-1970s masonry chimney and every multi-flue stack - which means most of the historic district and a surprising number of Whitlock Avenue ranches. A high-resolution camera scans the full flue length, documenting liner condition, creosote class, mortar joint integrity, and any obstructions. Clause 4 of the Haven Standard mandates this photo record on every job; we’ve done it since 2009.
On a Whitlock Avenue ranch-style property, our tech pulled the firebox apart and found the exterior stack carried three flues: one active, two sealed behind original lime mortar on fireplaces closed decades ago. A Level 2 inspection scoped all three, cleared the active flue liner, and flagged cracked tile in a dormant flue before the homeowner sealed it permanently. Two 1970s brick ranches off Church Street had the same pattern the same month - a single-vent assumption would have missed it every time.

Creosote Removal
Creosote in Marietta chimneys comes in three classes, and the class determines the removal method. Class I is flaky soot, brushed clean in a standard sweep. Class II is tar-like and requires rotary chain tools. Class III is glazed, rock-hard, and demands specialized chemical treatment followed by mechanical removal - it’s also the most common precursor to chimney fires. Marietta’s mild winters mean many homeowners burn only during episodic cold snaps, and that start-stop pattern produces more Class II and III creosote than continuous burning would. Rural properties with wood stoves see the heaviest loading; we check these mid-season and document what we find.

Soot Removal
Soot accumulation reduces draft efficiency and can recirculate fine particulates into living spaces. For Marietta’s gas-log retrofits in 1980s-90s East Cobb homes, soot mixed with combustion moisture can form acidic deposits that degrade stainless steel liners if the original flue wasn’t properly rated for the appliance. We remove soot mechanically and verify liner material compatibility before signing off.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Marietta
We source materials through Haven’s buying network to keep customer prices honest: DuraFlex stainless steel liners for Marietta’s end-of-life clay tile replacements, HeatShield cerfractory sealant for resurfacing compromised smoke chambers in Square-area masonry, and Olympia Chimney components for cap and crown repairs on multi-flue stacks. Parts are stocked for common Marietta configurations, so most repairs don’t wait on shipping. Gelco caps fit the deep corbelled crowns we see on pre-Civil War chimneys near Church Street, where standard aftermarket caps won’t seat properly.
Common Chimney Cleaning & Sweep Problems We See in Marietta Homes

- Multi-flue stacks missed on single-vent assumptions. On the blocks around Whitlock Avenue and Church Street near Marietta Square, what looks like a single exterior chimney stack routinely serves two or three separate sealed flues from long-closed fireplaces, so our techs scope every flue in the stack before calling any chimney clean. In East Cobb’s newer subdivisions that multi-flue, capped-off complexity simply doesn’t exist.
- End-of-life clay tile liners in Cobb County ranches. Treating ranch-home clay tile liners as sound because the fire burns fine is a common mistake - 1950s-1970s Cobb County liners are at end-of-life and show hairline cracks that a Level 1 inspection won’t catch. The camera finds them.
- Freeze-thaw spalling on historic masonry. Skipping a chimney crown and flashing check on 150+ year old lime-mortar chimneys means freeze-thaw spalling after a Cobb County ice event goes unnoticed until water is already in the smoke chamber. Marietta’s occasional winter ice events subject aged lime-mortar joints to stress they were never engineered for in Georgia’s climate.
- Creosote buildup from intermittent burning patterns. Marietta’s winters are mild enough that most residents burn fires only during episodic cold snaps rather than continuously - a pattern that lets creosote from incomplete burns accumulate without the consistent heat that would naturally reduce it. Rural wood-stove properties past the city limits face the opposite problem: continuous heavy loading that demands more frequent attention.
Pricing for Chimney Cleaning & Sweep in Marietta, GA
| Service | Typical Range in Marietta |
|---|---|
| Annual Sweep (single flue, standard access) | $189-$249 |
| Annual Sweep (multi-flue stack, 2-3 flues) | $279-$349 |
| Level 1 Inspection with sweep | $189-$279 |
| Level 2 Camera Inspection with sweep | $279-$379 |
| Class III Creosote Removal (chemical + mechanical) | $349-$549 |
| Wood stove primary-heat mid-season check | $149-$199 |
What moves you within these ranges: flue count, roof access difficulty, creosote class, and whether the chimney has been swept within NFPA’s recommended interval. A multi-flue Victorian stack on Whitlock Avenue with three flues and a steep roof pitch runs higher than a single-flue ranch in East Cobb with walkable access. We assess on site, deliver a written price before any work starts, and stick to it. Estimates are free. Call (470) 435-7984.
We Also Serve Cities Near Marietta

Our Chimney Cleaning & Sweep crews cover Kennesaw, Atlanta, Roswell, and Decatur from the same dispatch, with the same Haven Standard on every job. If you’re outside Marietta city limits - whether in unincorporated Cobb County or a neighboring metro area - the inspection standard doesn’t change. Schedule Chimney Cleaning & Sweep in Marietta or any surrounding community; we’ll confirm your service area when you call.
Serving Marietta, GA - Our Local Coverage Area
We’re based in the Marietta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cleaning & Sweep in Marietta

Every 6 months, minimum, and sometimes mid-season if you’re burning 8+ hours daily through winter. Wood stoves as primary heat load creosote faster than occasional fireplace use, and Marietta’s rural properties often burn softer woods like pine that deposit faster than hardwood. We’ll inspect at the start of season, document the creosote class, and tell you whether your specific burn pattern puts you on a 6-month or annual cycle. Call (470) 435-7984 for an exact quote - estimates are free.
Because sealed flues still ventilate and can still fail. On Whitlock Avenue and Church Street near Marietta Square, exterior stacks commonly contain two or three flues, with only one connected to an active hearth. The sealed flues may have cracked clay tile, deteriorated mortar, or animal intrusion that compromises the stack’s structural integrity or creates pathways for carbon monoxide. Our Level 2 inspection scopes every flue in the stack; Clause 4 of the Haven Standard requires the photo record, active or not.
Yes, because “works fine” doesn’t reveal liner condition. Cobb County’s 1950s-1970s brick ranches have clay tile flue liners now reaching end-of-life; hairline cracks are common and invisible from the firebox. A Level 1 inspection won’t catch them. The camera will. Yearly inspection also documents condition for your insurer and catches creosote buildup before it reaches Class III. Call (470) 435-7984 to schedule - estimates are free.
The masonry itself. These chimneys feature original lime-mortar joints (not modern Portland cement), multi-flue configurations, deep corbelled crowns, and clay tile liners that may be 100+ years old. Lime mortar is more breathable but less freeze-thaw resistant than modern mixes, and Cobb County’s occasional ice events exploit that weakness. We use softer brushing techniques to avoid damaging historic mortar, inspect every flue in multi-flue stacks, and document crown and flashing condition specifically for spalling risk. Standard power tools and single-flue assumptions don’t apply.
Burn only seasoned hardwood (oak, hickory, maple) at 20% moisture or less - not pine, not construction scraps, not driftwood. Build hot, fast fires rather than slow smolders; incomplete combustion is what deposits creosote. Keep the damper fully open until the fire is established, and don’t close it down to extend burn time. For Marietta’s intermittent burners, this matters even more: cold starts produce more creosote than continuous burning. Rural wood-stove users should check their stove’s manual for proper air settings and consider a mid-season inspection if burn hours stack up fast. Call (470) 435-7984 if you want us to assess your current creosote load - estimates are free.
Written by Corrine Halstead, Owner at Level Two Chimney Atlanta, serving Marietta since 2009 under the Haven Standard.





Before
After
Before
After